It is possible to install in a limited space with a small size packing machine, and productivity improvement and improvement of packing quality can be expected with minimum cost.

▶Specifications

01

ㆍ[Patent] Significant savings by converting the ultra high thermoforming packing machine into facility investment. (option)

02

ㆍWhen a facility problem occurs, the details of the fault are displayed in the error history window, and the problem can be quickened.
ㆍThe time can be adjusted according to the packaging conditions and the skill of the operator.
ㆍYou can fine-tune temperature, vacuum degree, time, and sequence for each package. And it has a setting saving function, so it is convenient to use the stored contents depending on the application.

03

ㆍIt has a split cutting function in the same section, so it is possible to cut in small packing units.
ㆍWhen cutting in the forward direction, it is possible to select the driving and non-driving knife options.

04

ㆍRails or hinges are attached to the bottom of the mold, making it easy to replace the mold.
ㆍThe foaming mold and the sealing mold are equipped with a complete thermal protection device, which eliminates the need to supply cooling water, thus saving costs.

05

ㆍThe lubricating oil injection port of the rotation and operation part is assembled to the outside, so that the lubricant can be easily injected.

• 

  All parts can be disassembled and cleaned with water.

• 

  Designed to fit the body shape of the Orient, the worker's fatigue can be minimized.

• 

  [Patent] Significant savings by converting the ultra high thermoforming packing machine into facility investment. (option)

• 

  Thermoforming Vacuum packing, steel vacuum, vacuum, cup sealer, MAP etc. (option)

• 

  Options such as automatic feeder, filling machine, and labeler are available.

• 01

  The film which can be formed by heat is supplied with uniform tension.

• 02

  When the supplied bottom film is properly heated at the molding station, the container is molded to fit the frame.

• 03

  Fill the molded container with the product to be packed manually or automatically.

• 04

  The top film covers the container containing the product and then moves to the vacuum / sealing station with the bottom film.
  You can print expiration dates, product numbers, and so on.

• 05

  Make a vacuum in the vacuum / sealing station and, if necessary, connect the top and bottom film with heat and pressure after the gas is filled.
  You can choose from various packaging such as vacuum pack, gas replacement pack, steam flush pack, hot pack, and skin pack.

• 06

  The finished product is cut in the cross direction and the proceeding direction, and it is possible to select the date cut, zigzag cut, dotted line cut according to the type.
  Labeler function can be installed in this area.